Elektrischer stationärer Schmelzofen PT Mk.II bis 1100 °C
Max temp: 1100 °C | Capacity: 105–1250 kg Al | Voltage: 400 V
Elektrischer stationärer Schmelzofen PT Mk.II bis 1100 °C
Model: PT 100/11 Mk.II | 1100 °C | 105 kg Al | 23 kW
In Stock
| 01025059
€12 990
€15 718
inkl. MwSt.
Model: PT 200/11 Mk.II | 1100 °C | 185 kg Al | 46 kW
In Stock
| 01025061
€14 990
€18 138
inkl. MwSt.
Model: PT 300/11 Mk.II | 1100 °C | 275 kg Al | 50 kW
In Stock
| 01025062
€16 990
€20 558
inkl. MwSt.
Model: PT 400/11 Mk.II | 1100 °C | 320 kg Al | 54 kW
In Stock
| 01025063
€18 990
€22 978
inkl. MwSt.
Model: PT 500/11 Mk.II | 1100 °C | 480 kg Al | 61 kW
Upon request
| 01025065
€20 990
€25 398
inkl. MwSt.
Model: PT 650/11 Mk.II | 1100 °C | 590 kg Al | 75 kW
Upon request
| 01025066
€22 990
€27 818
inkl. MwSt.
Model: PT 800/11 Mk.II | 1100 °C | 970 kg Al | 95 kW
Upon request
| 01025067
€22 990
€27 818
inkl. MwSt.
Model: PT 900/11 Mk.II | 1100 °C | 1080 kg Al | 110 kW
Upon request
| 01025069
€28 990
€35 078
inkl. MwSt.
Model: PT 1200/11 Mk.II | 1100 °C | 1250 kg Al | 130 kW
Upon request
| 01025070
€33 990
€41 128
inkl. MwSt.
Electric melting furnace for aluminium alloys up to 1100 °C
Need to melt and hold aluminium efficiently, even in a foundry with limited installation space?
The PT Mk.II melting furnace up to 1100 °C is designed for foundries that need efficient aluminium melting, stable holding temperature, compact dimensions and easy maintenance.
When is this furnace the right choice?
- You need to melt aluminium and aluminium alloys
- You also need to hold molten aluminium at casting temperature
- You require a furnace chamber temperature up to 1100 °C
- You want to reduce energy consumption during melting and holding
- You have limited installation space in the foundry
- You need easy crucible and heating element replacement
The PT Mk.II furnace uses a compact octagonal design, modern insulation materials and heating spirals placed in grooves of refractory castable blocks. This supports efficient heat transfer, protects the heating elements and helps reduce heat loss during operation.
Key features:
- Maximum furnace chamber temperature 1100 °C
- Maximum temperature for long-term operation 1000 °C
- Recommended operating range in crucible 650–850 °C
- Electric resistance heating
- Melting and holding of aluminium alloys
- Octagonal furnace design
- Emergency drain at the bottom of the furnace
- Available aluminium capacity from approx. 105 to 1250 kg
Typical applications
- Melting of aluminium and aluminium alloys
- Holding of aluminium and aluminium alloys
- Preparation of molten aluminium before casting
- Foundry melting workplaces
- Support furnace for die-casting operations
- Small and medium aluminium casting operations
Typical industries
- Aluminium foundries
- Non-ferrous metal casting plants
- Die-casting operations
- Automotive suppliers
- Mechanical engineering
- Toolmaking and mould production
- Maintenance and repair foundries
Main benefits
- Melting and holding in one furnace
- Energy-efficient furnace design
- Stable crucible temperature
- Easy replacement of crucible and heating elements
- Emergency drain for increased process safety
Suitable for customers who need an electric melting furnace for aluminium alloys with compact dimensions, easy maintenance and stable holding conditions.
For applications focused mainly on holding molten aluminium, consider the PTE Mk.II electric holding furnace. If transport of molten aluminium is required, consider the PTT transport holding furnace.
For applications focused mainly on holding molten aluminium, consider the PTE Mk.II electric holding furnace. If transport of molten aluminium is required, consider the PTT transport holding furnace.
Melting furnace or holding furnace?
Optional accessories available at additional cost
- Crucible
- Charge thermocouple of the K type with protective tube
- Thermocouple of the K type in the wall of the crucible (not possible for PT 100/11 Mk.II)
- Ht205 controller
- Work cycle monitoring with USB output
- Preparation for connecting the lid with the batching equipment of a casting device
- System to check for cracks in the crucible
- Measuring loop calibration (thermocouple + controller)
- Connection of the furnace with the switchboard, within a metal hose with a metal sheath. The metal hose with a protective metal sheath on the surface always should be used for hoses with lengths exceeding 5 m.
- RS232 or EIA485 interface (software + interface), it is necessary to use a controller (Ht205)
- Signalling when the temperature drops below 650 °C
Technical parameters
The table below shows the standard technical parameters for the PT Mk.II electric stationary melting furnace up to 1100 °C.
← Scroll horizontally to view all parameters →
| Parameter | PT 100/11 Mk.II | PT 200/11 Mk.II | PT 300/11 Mk.II | PT 400/11 Mk.II | PT 500/11 Mk.II | PT 650/11 Mk.II | PT 800/11 Mk.II | PT 900/11 Mk.II | PT 1200/11 Mk.II |
|---|---|---|---|---|---|---|---|---|---|
| Capacity (kg Al) | 105 | 185 | 275 | 320 | 480 | 590 | 970 | 1080 | 1250 |
| Maximum temperature in furnace chamber (°C) | 1100 | 1100 | 1100 | 1100 | 1100 | 1100 | 1100 | 1100 | 1100 |
| Maximum temperature for long-term operation (°C) | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 |
| Recommended operating temperature range in crucible (°C) | 650–850 | 650–850 | 650–850 | 650–850 | 650–850 | 650–850 | 650–850 | 650–850 | 650–850 |
| Crucible type | A 300 | BU 200 | BU 300 | BU 350 | BU 500 | BU 600 | BU 800 | BN 900 | BN 1200 |
| Crucible volume (l) | 40 | 70 | 110 | 135 | 180 | 220 | 300 | 370 | 470 |
| Loading height (mm) | 790 | 850 | 950 | 1050 | 1100 | 1300 | 1400 | 1500 | 1650 |
| Weight (kg) | 450 | 555 | 670 | 785 | 890 | 1125 | 1210 | 1310 | 1460 |
| Input (kW) | 23 | 46 | 50 | 54 | 61 | 75 | 95 | 110 | 130 |
| Protection (A) | 40 | 80 | 100 | 100 | 125 | 125 | 160 | 200 | 250 |
| Voltage (V) | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 |
For additional technical details, furnace configurations and available options, please refer to the manufacturer's product page: PT Mk.II Electric Melting Stationary Furnace.
Not sure which PT Mk.II melting furnace is suitable for your aluminium melting process?
Contact us and our specialists will help you select the right furnace capacity, crucible type and optional equipment for your foundry operation.
Contact us and our specialists will help you select the right furnace capacity, crucible type and optional equipment for your foundry operation.
View the complete product page for detailed information about construction, accessories, applications and technical specifications.
Zusätzliche Parameter
| Kategorie: | Industrieöfen |
|---|---|
| Garantie: | 2 Jahre |
FOR RELIABLE HEAT TREATMENT AND INDUSTRIAL PROCESSES
You need a furnace solution that delivers consistent results, long service life and reliable performance in your process. LAC furnaces are designed for laboratory and industrial applications, from material testing and heat treatment to demanding production processes. With a focus on temperature uniformity, durability and process stability, they help you achieve repeatable results and reduce operational risks.
Typical applications: material testing • heat treatment • ceramics processing • glass • laboratory and industrial production
| Hersteller : | LAC, s.r.o. |
|---|---|
| Adresse : | Topolová 933 667 01 Židlochovice Czech Republic |
| E-Mail : | sales@lac.cz |