Gradient Furnace LSP 30/13 up to 1300 °C
Max temp: 1300°C | Volume: 30 l | Voltage: 400 V
Gradient furnace for testing at up to five temperatures at the same time
Need to test different samples at different temperatures without using several furnaces or repeatedly changing the furnace setting?
The LSP 30/13 model is a gradient furnace for controlled laboratory testing up to 1300 °C.
- You need to test samples at several temperatures at once
- You want to speed up long-term testing
- You do not want to use several separate furnaces
- You need a furnace suitable for controlled gradient testing
Key features:
- Maximum temperature 1300 °C
- Recommended maximum temperature for long-term operation 1200 °C
- Five-zone gradient heating concept
- Inner volume 30 l
- Heating coils in grooves of the lining on both sides along the full furnace length
- Thermocouple Type “S”
- Contactless switching relay for noiseless operation
Typical applications
This gradient furnace is designed for laboratory testing of samples at different temperatures in one process. It is especially suitable for fast comparison testing, long-term thermal trials and development work where several temperature levels must be evaluated at the same time. :contentReference[oaicite:2]{index=2}
- Long-term laboratory testing
- Comparative testing of samples at different temperatures
- Material research and development
- Thermal process verification
- Testing where several temperature levels must be monitored simultaneously
Ideal choice if
- You need a gradient furnace up to 1300 °C
- You want to test several temperature levels in one furnace
- You perform long-term laboratory testing
- You are looking for a stand-alone furnace for demanding development work
Main benefits
- Up to five temperatures at the same time
- Faster testing without repeated resetting
- Good heat accumulation thanks to brick lining
- Noiseless operation
- Simple operation and installation
For standard laboratory heat treatment in a single chamber, consider the L series or a more economical LE series.
Optional features
- Multi-channel meter Ht100 (temperature measurement at up to 10 points)
- Calibration of the controller measuring input
- RS232 or EIA485 interface including software and cabling
- HtMonit set (software + interface)
Contact us or use our sample testing services.
For technical specifications, construction and design, please refer to the product page.
| Category: | Laboratory furnaces |
|---|---|
| Warranty: | 3 years |
| Weight: | 60 kg |
| Tmax °C: | 1300 |
| Recommended operating temperature range in °C: | 600 - 1250 |
| Volume in l: | 30 |
| External dimensions (w × h × d) mm: | 1700×1200×500 |
| Internal dimensions (w × h × d) mm: | 1400×140 |
| Input in kW: | 7 |
| Weight in kg: | 240 |
| Voltage V: | 400 |
You need a gradient furnace for testing multiple temperatures at once
and comparing material behaviour up to 1300 °C.
The LSP series allows operation with up to five temperature zones simultaneously, eliminating the need for multiple furnaces or repeated testing cycles.
Ideal for fast development, optimisation of firing curves and efficient comparison of material behaviour under different thermal conditions.
Explore LSP models designed for multi-temperature testing ↓