Chamber Oven SV Mk.II up to 300 °C
Max temp: 300 °C | Volume: 650–8000 l | Voltage: 400 V
Volume: 650 l
Upon request
| 01131728
€9 990
€12 088
incl. VAT
Volume: 1700 l
In Stock
| 01135425
€16 500
€19 965
incl. VAT
Volume: 2400 l
In Stock
| 01139247
€18 900
€22 869
incl. VAT
Volume: 3300 l
Upon request
| 01139250
€20 900
€25 289
incl. VAT
Volume: 4000 l
Upon request
| 01139251
€24 500
€29 645
incl. VAT
Volume: 4500 l
Upon request
| 01139252
€27 900
€33 759
incl. VAT
Volume: 5000 l
Upon request
| 01139253
€29 500
€35 695
incl. VAT
Volume: 8000 l
Upon request
| 01139257
€36 900
€44 649
incl. VAT
Volume: 1001 l
In Stock
| 01133374
€11 990
€14 508
incl. VAT
Volume: 1002 l
In Stock
| 01134315
€11 990
€14 508
incl. VAT
Volume: 1501 l
Upon request
| 01135042
€15 900
€19 239
incl. VAT
Volume: 1502 l
Upon request
| 01135396
€15 900
€19 239
incl. VAT
Volume: 3001 l
Upon request
| 01139248
€19 900
€24 079
incl. VAT
Volume: 3002 l
Upon request
| 01139249
€19 900
€24 079
incl. VAT
Volume: 6001 l
Upon request
| 01139254
€31 900
€38 599
incl. VAT
Volume: 6002 l
Upon request
| 01139256
€31 900
€38 599
incl. VAT
Chamber oven with high air circulation up to 300 °C
Need an industrial oven for drying, preheating, curing, vulcanisation or artificial ageing with very even temperature distribution?
The SV Mk.II chamber oven up to 300 °C is designed for production processes where you need high air circulation, fast heating, precise temperature distribution and easy maintenance.
When is this oven the right choice?
- You need drying or heating up to 300 °C
- You process medium or large production batches
- You require very precise temperature distribution
- You need quick run-up to the required process temperature
- You want easy access for maintenance
- You need custom dimensions or a special loading configuration
The SV Mk.II replaces the older SV oven line. Compared with the previous design, it offers faster air circulation, better temperature uniformity, quicker heating and easier maintenance. The fan and heating basket are positioned in the ceiling, which reduces the built-up area and improves access to the chamber.
Key features:
- Maximum temperature 300 °C
- Recommended operating range 100–300 °C
- High horizontal air circulation
- Temperature distribution ΔT 6 °C for ovens up to 6000 L
- Temperature distribution ΔT 10 °C for ovens over 6000 L
- Chamber volumes from approx. 650 to 8000 L
- Standard bottom load capacity up to approx. 2000 kg
- Custom dimensions and loading systems available
Typical applications
- Drying
- Vulcanisation
- Surface finish hardening
- Drying of granulate
- Burning-in of electrical components
- Preheating before further processing
- Preheating reusable moulds and semi-finished products
- Artificial ageing of aluminium and aluminium alloys
- Low-temperature tempering
- Drying of moulds and cores
- Tempering of rubber and electric components
- Firing of insulation paints
- Elimination of acid brittleness
Typical industries
- Automotive industry
- Rubber processing
- Plastics processing
- Electrical industry
- Foundries and casting operations
- Mechanical engineering
- Industrial production with medium or large batches
Main benefits
- Very even temperature distribution
- Quick run-up to the required process temperature
- High air circulation for repeatable production cycles
- Easy maintenance thanks to ceiling-mounted fan and heating basket
- Custom dimensions and loading configurations available
Suitable for customers who need a chamber oven with high air circulation for drying, curing, preheating or ageing processes up to 300 °C.
Optional accessories available at additional cost
- Ht205 controller (30 programmes with 15 steps each)
- Ht200 controller (30 programmes with 25 steps each, USB interface)
- Automatic ventilation flap for cooling the furnace’s operational space (an Ht205 or Ht200 controller is needed)
- Automatic suction flap for cooling the furnace’s operational space (an Ht205 or Ht200 controller is needed)
- Controlled underpressure forced cooling (an Ht205 or Ht200 controller is needed)
- Uncontrolled underpressure forced cooling (an Ht205 or Ht200 controller is needed)
- Modification for the rubber industry (muffle sealing, necessary for use, and exhaustion fan)
- Optimization of the temperature field to meet the DIN 17052-01 ΔT 4 °C standard in the internal usable space in case of modification for the flat bottom of the furnace, resp. ΔT 6 °C in the internal usable space in case of modification for a trolley (in an empty dryer at Tmax, for volumes up to 6,000 litres, a grommet for TUS test and measuring loop calibration is necessary), including a report from measuring
- Measuring loop calibration
- Grommet for TUS test measuring thermocouples
- EIA-485 or LAN interfaces
- HtMonit EV set (software + interface)
- Three-channel digital temperature recorder
- Ammeters for checking the status of heating elements
- Charging trolley with shelves of a steel construction for temperature in furnace to 250 °C (4 shelves up to a volume of 4,500 L)
- Loading frame with 4 shelves made of constructional steel (only up to a volume of 4,500 L)
Technical parameters
The table below shows the standard technical parameters for the SV Mk.II chamber dryer up to 300 °C.
← Scroll horizontally to view all parameters →
| Parameter | SV 650/30 Mk.II | SV 1001/30 Mk.II | SV 1002/30 Mk.II | SV 1501/30 Mk.II | SV 1502/30 Mk.II | SV 1700/30 Mk.II | SV 2400/30 Mk.II | SV 3001/30 Mk.II | SV 3002/30 Mk.II | SV 3300/30 Mk.II | SV 4000/30 Mk.II | SV 4500/30 Mk.II | SV 5000/30 Mk.II | SV 6001/30 Mk.II | SV 6002/30 Mk.II | SV 8000/30 Mk.II |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Maximum temperature (°C) | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 |
| Recommended operating range (°C) | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 | 100–300 |
| Volume (l) | 650 | 1000 | 1000 | 1500 | 1500 | 1700 | 2400 | 3000 | 3000 | 3300 | 4000 | 4500 | 5000 | 6000 | 6000 | 8000 |
| Internal dimensions (w × h × d, mm) | 1000×800×800 | 1000×1200×800 | 1000×1000×1000 | 1000×1800×800 | 1000×1100×1400 | 1000×1700×1000 | 1000×1700×1400 | 1000×2200×1400 | 1000×1700×1800 | 1100×2000×1500 | 1200×2000×1600 | 2000×1200×1900 | 1700×1700×1700 | 1900×2200×1400 | 2000×1500×2000 | 2000×2000×2000 |
| External dimensions (w × h × d, mm) | 1800×1750×1200 | 1800×2150×1200 | 1800×1950×1400 | 1800×2750×1200 | 1800×2050×1800 | 1800×2650×1400 | 1800×2650×1800 | 1800×3150×1800 | 1800×2650×2200 | 1900×2950×1900 | 2000×2950×2000 | 2800×2150×2300 | 2500×2650×2100 | 2700×3150×1800 | 2800×2450×2400 | 2800×2950×2400 |
| Input (kW) | 12 | 12 | 12 | 18 | 18 | 24 | 24 | 24 | 24 | 24 | 30 | 36 | 48 | 60 | 60 | 72 |
| Weight (kg) | 656 | 740 | 760 | 886 | 1000 | 970 | 1200 | 1328 | 1450 | 1450 | 1550 | 1800 | 1750 | 1850 | 2050 | 2300 |
| Voltage (V) | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 |
| Protection (A) | 25/3 | 25/3 | 25/3 | 40/3 | 40/3 | 50/3 | 50/3 | 50/3 | 50/3 | 50/3 | 63/3 | 80/3 | 100/3 | 125/3 | 125/3 | 160/3 |
| Max. load capacity of bottom (kg) | 400 | 400 | 400 | 400 | 400 | 500 | 700 | 700 | 700 | 800 | 1200 | 2000 | 2000 | 2000 | 2000 | 2000 |
Not sure which SV Mk.II chamber dryer is suitable for your process?
Contact us and our specialists will help you select the right chamber size, load capacity, airflow configuration and optional equipment for your drying or heat treatment application.
Contact us and our specialists will help you select the right chamber size, load capacity, airflow configuration and optional equipment for your drying or heat treatment application.
Additional parameters
| Category: | Industrial furnaces |
|---|---|
| Warranty: | 2 years |
FOR RELIABLE HEAT TREATMENT AND INDUSTRIAL PROCESSES
You need a furnace solution that delivers consistent results, long service life and reliable performance in your process. LAC furnaces are designed for laboratory and industrial applications, from material testing and heat treatment to demanding production processes. With a focus on temperature uniformity, durability and process stability, they help you achieve repeatable results and reduce operational risks.
Typical applications: material testing • heat treatment • ceramics processing • glass • laboratory and industrial production
| Manufacturing company : | LAC, s.r.o. |
|---|---|
| Address : | Topolová 933 667 01 Židlochovice Czech Republic |
| E-mail : | sales@lac.cz |