The e-shop is primarily for customers with EU VAT.
More
    Registration
    Home / Furnaces & Dryers / Industrial furnaces / Melting Furnace PT Mk.II up to 1100 °C

    Melting Furnace PT Mk.II up to 1100 °C

    Brand: LAC, s.r.o.

    Max temp: 1100 °C | Capacity: 105–1250 kg Al | Voltage: 400 V

    Choose variant

    Delivery options
    Code: 01025059
    from €12 990 from €15 718 incl. VAT
    Melting Furnace PT Mk.II up to 1100 °C
    Brand: LAC, s.r.o.
    PT Mk.II electric melting stationary furnace up to 1100 °C LAC
    Al: 105 kg Al
    In Stock | 01025059
    €12 990
    €15 718 incl. VAT
    Al: 185 kg Al
    In Stock | 01025061
    €14 990
    €18 138 incl. VAT
    Al: 275 kg Al
    In Stock | 01025062
    €16 990
    €20 558 incl. VAT
    Al: 320 kg Al
    In Stock | 01025063
    €18 990
    €22 978 incl. VAT
    Al: 480 kg Al
    Upon request | 01025065
    €20 990
    €25 398 incl. VAT
    Al: 590 kg Al
    Upon request | 01025066
    €22 990
    €27 818 incl. VAT
    Al: 970 kg Al
    Upon request | 01025067
    €26 990
    €32 658 incl. VAT
    Al: 1080 kg Al
    Upon request | 01025069
    €28 990
    €35 078 incl. VAT
    Al: 1250 kg Al
    Upon request | 01025070
    €33 990
    €41 128 incl. VAT

    Electric melting furnace for aluminium alloys up to 1100 °C

    Need to melt and hold aluminium efficiently, even in a foundry with limited installation space?

    The PT Mk.II melting furnace up to 1100 °C is designed for foundries that need efficient aluminium melting, stable holding temperature, compact dimensions and easy maintenance.

    When is this furnace the right choice?
    • You need to melt aluminium and aluminium alloys
    • You also need to hold molten aluminium at casting temperature
    • You require a furnace chamber temperature up to 1100 °C
    • You want to reduce energy consumption during melting and holding
    • You have limited installation space in the foundry
    • You need easy crucible and heating element replacement
    The PT Mk.II furnace uses a compact octagonal design, modern insulation materials and heating spirals placed in grooves of refractory castable blocks. This supports efficient heat transfer, protects the heating elements and helps reduce heat loss during operation.

    Key features:

    • Maximum furnace chamber temperature 1100 °C
    • Maximum temperature for long-term operation 1000 °C
    • Recommended operating range in crucible 650–850 °C
    • Electric resistance heating
    • Melting and holding of aluminium alloys
    • Octagonal furnace design
    • Emergency drain at the bottom of the furnace
    • Available aluminium capacity from approx. 105 to 1250 kg

    Typical applications

    • Melting of aluminium and aluminium alloys
    • Holding of aluminium and aluminium alloys
    • Preparation of molten aluminium before casting
    • Foundry melting workplaces
    • Support furnace for die-casting operations
    • Small and medium aluminium casting operations

    Typical industries

    • Aluminium foundries
    • Non-ferrous metal casting plants
    • Die-casting operations
    • Automotive suppliers
    • Mechanical engineering
    • Toolmaking and mould production
    • Maintenance and repair foundries

    Main benefits

    • Melting and holding in one furnace
    • Energy-efficient furnace design
    • Stable crucible temperature
    • Easy replacement of crucible and heating elements
    • Emergency drain for increased process safety
    Suitable for customers who need an electric melting furnace for aluminium alloys with compact dimensions, easy maintenance and stable holding conditions.

    For applications focused mainly on holding molten aluminium, consider the PTE Mk.II electric holding furnace. If transport of molten aluminium is required, consider the PTT transport holding furnace.

    Melting furnace or holding furnace?

    • Choose PT Mk.II for melting and holding aluminium alloys
    • Choose PTE Mk.II when the main task is holding molten aluminium
    • Choose PTT when transport of molten aluminium is required

    Optional accessories available at additional cost

    • Crucible
    • Charge thermocouple of the K type with protective tube
    • Thermocouple of the K type in the wall of the crucible (not possible for PT 100/11 Mk.II)
    • Ht205 controller
    • Work cycle monitoring with USB output
    • Preparation for connecting the lid with the batching equipment of a casting device
    • System to check for cracks in the crucible
    • Measuring loop calibration (thermocouple + controller)
    • Connection of the furnace with the switchboard, within a metal hose with a metal sheath. The metal hose with a protective metal sheath on the surface always should be used for hoses with lengths exceeding 5 m.
    • RS232 or EIA485 interface (software + interface), it is necessary to use a controller (Ht205)
    • Signalling when the temperature drops below 650 °C

    Technical parameters

    The table below shows the standard technical parameters for the PT Mk.II electric stationary melting furnace up to 1100 °C.

    ← Scroll horizontally to view all parameters →
    Parameter PT 100/11 Mk.II PT 200/11 Mk.II PT 300/11 Mk.II PT 400/11 Mk.II PT 500/11 Mk.II PT 650/11 Mk.II PT 800/11 Mk.II PT 900/11 Mk.II PT 1200/11 Mk.II
    Capacity (kg Al) 105 185 275 320 480 590 970 1080 1250
    Maximum temperature in furnace chamber (°C) 1100 1100 1100 1100 1100 1100 1100 1100 1100
    Maximum temperature for long-term operation (°C) 1000 1000 1000 1000 1000 1000 1000 1000 1000
    Recommended operating temperature range in crucible (°C) 650–850 650–850 650–850 650–850 650–850 650–850 650–850 650–850 650–850
    Crucible type A 300 BU 200 BU 300 BU 350 BU 500 BU 600 BU 800 BN 900 BN 1200
    Crucible volume (l) 40 70 110 135 180 220 300 370 470
    Loading height (mm) 790 850 950 1050 1100 1300 1400 1500 1650
    Weight (kg) 450 555 670 785 890 1125 1210 1310 1460
    Input (kW) 23 46 50 54 61 75 95 110 130
    Protection (A) 40 80 100 100 125 125 160 200 250
    Voltage (V) 400 400 400 400 400 400 400 400 400

    For additional technical details, furnace configurations and available options, please refer to the manufacturer's product page: PT Mk.II Electric Melting Stationary Furnace.

    Not sure which PT Mk.II melting furnace is suitable for your aluminium melting process?
    Contact us and our specialists will help you select the right furnace capacity, crucible type and optional equipment for your foundry operation.

    Additional parameters

    Category: Industrial furnaces
    Warranty: 2 years
    FOR RELIABLE HEAT TREATMENT AND INDUSTRIAL PROCESSES

    You need a furnace solution that delivers consistent results, long service life and reliable performance in your process. LAC furnaces are designed for laboratory and industrial applications, from material testing and heat treatment to demanding production processes. With a focus on temperature uniformity, durability and process stability, they help you achieve repeatable results and reduce operational risks.

    Typical applications: material testing • heat treatment • ceramics processing • glass • laboratory and industrial production
    Manufacturing company : LAC, s.r.o.
    Address : Topolová 933 667 01 Židlochovice Czech Republic
    E-mail : sales@lac.cz